Cube Ice Making System and Taking off Ice System with HACCP and FDA、QS Certifications

       Do you know the ice making system and taking off ice system cube ice machine ?If  you do cube ices business ,the concept you have to know .

       It is as follows:

      Principle edible cube ice machine ice into ice party system and the de- ice system ice-making system , into ice water circulation systems and refrigeration systems , ice water circulation system : Start the ice , the water at one time outside edible adding a sufficient quantity of ice , while the circulating pump via a stainless steel conveyor ice water supply pipe to the top of the water ice is uniform along the downstream, close to the ice in the ice making water is subjected to heat exchange device is ice crystals , ice water was not formed to import water tanks, pumps through the ice again, and continue the cycle , when ice thickness reaches the set starts off the ice , a single ice until the end. Together while cooling system , the compressor of the low-temperature low-pressure system to compress the refrigerant sucked through the suction , the compressor through the high temperature high pressure compressed refrigerant vapor into the condenser , the refrigerant in the condenser discharge pressure setting hot, saturated liquid condensing pressure becomes , the intercooler and then into the subcooled , through adiabatic throttling expansion valve , and then into the ice maker and the ice maker water flowing through the heat exchanger , the liquid the refrigerant absorbs the heat of boiling water into low-temperature low-pressure vapor is then sucked into the compressor again , repeat the above process until the thickness of the ice thickness is set , the end of a single refrigerant into ice removal process .

 

      Taking off ice process, when setting the thickness of the ice thickness, wherein a de-icing solenoid valve opens, and when the solenoid valve is set to close the water supply cycle. Hot refrigerant gas into the ice maker to make ice temperature, the ice in the ice surface due to the heat loss of adhesion of micro melting ice and the ice separation own weight fall below the square ice comes temporary storage freezer, the ice screw through lost output. When a group of ice after removal, de-icing heating when the group solenoid valve is closed, while circulating the water supply valve open ice, ice re-enter the state, while the other group de-ice the ice maker heating solenoid valve opens, off the ice into the process, followed by cycle until all the ice off the end. End single off the ice. When a group of ice off the ice maker, the ice maker is in the other group ice state. 

      We cube ices have HACCP and FDA、QS Certifications so you can be free to buy .